SICK RFU62 Series

2 Safety information
2.1 Intended use
The RFU62x RFID read/write device is an intelligent 4Dpro sensor from the SICK
RFU6xx (UHF) product family. Version (working range): Mid Range.
The device is used for the automated, fixed identification of wireless-based data cards
(transponders) on moving or stationary objects, and for the management of these data
cards. The RFU620 base model processes all standard passive transponders in accor‐
dance with EPCglobal UHF C1G2 and ISO/IEC 18000-6C in the regional UHF carrier fre‐
quency range.
Thanks to its intelligent process logic, the device can be used either as a stand-alone
solution or as part of a group in a CAN network. In read mode, the device transmits the
results via a host interface to a higher-level computer (e.g. PLC) for further centralized
processing.
The compact device includes an internal antenna that is integrated into the housing.
The various device variants offer different connection options and data interfaces.
The device can be operated within a wide ambient temperature range. For details, see
"Technical data", page 82
The device is primarily designed for use in industrial and logistics areas, and meets the
requirements for industrial ruggedness, interfaces and data processing. The device
can, if necessary, be programmed to implement customer-specific modifications.
NOTE
The USB interface of the device is used in industrial environments only as a service
interface for temporary use (e.g. for configuration, troubleshooting). Permanent use in
real operation of the system as a host interface is not intended.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
2.1.1 Operational restrictions
NOTICE
Operational restrictions!
The frequency band of the device is configured for the specific type and region when
delivered. This enables the device to be operated in the respective approved region
without interfering with protected frequencies (such as mobile communications).
Operating the device in other regions, however, can interfere with protected frequen‐
cies.
■
Only use the device in the region for which it has been approved.
■
When reselling the device, inform the buyer of the fixed region assignment.
■
For further country-specific operating requirements, see the Quick Start Guide, a
printed copy of which is enclosed with the device or can be downloaded online
(PDF) at:
°
www.sick.com/RFU62x
SAFETY INFORMATION 2
8015930/ZTM0/2018-11-06 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU62x
9
Subject to change without notice