RFU62x-101xx RFU62x-104xx RFU62x-105xx
Supply voltage V
S
SELV in accordance with currently applicable standard EN 60950-1.
DC 10 V ... 30 V.
DC 20 V ... 30 V when
using the heater below
–25 °C
DC 10 V ... 30 V DC 48 V/ 57 V accord‐
ing to PoE technology
UL-certified devices require a SELV/LPS-compliant supply voltage in
accordance with UL/IEC/EN60950-1 or Class 2 according to NEC,
UL1310.
Power consumption Operation: 8 W typi‐
cal
1)
Max. 12 W when using
the heater below
–25 °C
Standby: 3 W typical
Operation: 8 W typical
1)
Standby: 3 W typical
Housing Cast aluminum, plastic (PPS)
Housing color Black, silver
Cover for USB inter‐
face
Plastic foil. Hinged for temporary access to the USB interface and mem‐
ory card slot. Recommended tightening torque for the cover screws:
60 Ncm ±5 Nm.
Enclosure rating IP67 (EN
60529:1991-10/
A2:2000-02)
IP65 (EN
60529:1991-10/
A2:2000-02)
IP67 (EN
60529:1991-10/
A2:2000-02)
Protection class III (EN 61140:2006-08)
Safety EN 60950-1:2006-04/A11: 2009-03/A1: 2010-03/A12: 2011-02
Weight Approx. 780 g
Dimensions
(L x W x H)
138 mm x 131 mm x 56 mm
2)
1)
At full transmitting power and no load on the switching outputs.
2)
With no protruding connector elements, see "Device view", page 18.
12.4 Ambient data
Table 27: Technical data for RFU62 x: Ambient data
RFU62x-101xx RFU62x-104xx RFU62x-105xx
Electromagnetic com‐
patibility (EMC)
EN 301489-3
Vibration resistance EN 60068-2-6:2008-02
Shock resistance EN 60068-2-27:2009-05
Ambient operating
temperature
–40 °C ... +50 °C –25 °C ... +50 °C –25 °C ... +50 °C
Storage temperature –40 °C ... +70 °C
Permissible relative
humidity
0% ... 90%, non-condensing
12.5 Working range diagram
see "Working range of the antenna (sensing range of the reading and writing field)",
page 19.
TECHNICAL DATA 12
8015930/ZTM0/2018-11-06 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU62x
85
Subject to change without notice
To Next Page
Loading...
