Installing/Mounting
4
4.1 Introduction
●
SITRANS F flowmeters are suitable for indoor and outdoor installations.
WARNING
Installation in hazardous location
Special
requirements apply to the location and interconnection of sensor and transmitter.
See Installation in hazardous location (Page 12)
This chapter describes how to install the flowmeter in the compact version as well as in the
remote version.
The transmitter is delivered ready for mounting on the sensor. The transmitter is delivered with
a compression plate ready for mounting on the sensor. No further assembling is necessary.
The transmitter can be installed either compact on the sensor or remote.
Figure 4-1 Compact installation
Figure 4-2 Remote installation
SITRANS FM MAG 5000/6000 IP67
Operating Instructions, 12/2019, A5E02338368-AD 21
To Next Page
Loading...
