Introduction
1
1.1 Purpose of this documentation
These
instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2 Document history
This document describes:
● SITRANS F MAG 5000 and MAG 6000 transmitters (standard version).
● Optional versions:
– MAG 5000 Blind and MAG 6000 Blind
– MAG 5000 CT and MAG 6000 CT
– MAG 6000 SV
Documentation history
The following table shows major changes in the documentation compared to the previous
edition.
Edition Remarks FW version
12/2019
● BBL42 as default unit
●
Improved operation without SENSORPROM
● Responsibility transfer to Siemens AG
4.09
12/2013
● Customer defined unit
●
Velocity value with unit
● Operational without SENSORPROM
● Signal suitability
4.07
01/2012 4.04
01/2010 First edition
SITRANS FM MAG 5000/6000 IP67
Operating Instructions, 12/2019, A5E02338368-AD 7
To Next Page
Loading...
