Environmental conditions according MID (Directive 2014/32/EU)
●
Environment class: E2 (electromagnetic), M1 (mechanical)
● Climatic class: -25°C - +55°C, condensing, closed
2.2 Conformity with European directives
The CE marking on the device symbolizes the conformity with the following European
directives:
Electromagnetic compatibili‐
ty EMC
2014/30/EU
Directive of the European Parliament and of the Council on the
harmonisation
of the laws of the Member States relating to elec‐
tromagnetic compatibility
Low voltage directive LVD
2014/35/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making
available on the market of electrical equipment designed
for use within certain voltage limits
Atmosphère explosible
ATEX
2014/34/EU
Directive of the European Parliament and the Council on the
harmonisation of the laws of the Member States relating to
equipment
and protective systems intended for use in potentially
explosive atmospheres
CT: Measuring instruments
directive MID
2014/32/EU
Directive of the European Parliament and the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of measuring instruments
The applicable directives can be found in the EU declaration of conformity of the specific device.
2.3
Installation in hazardous location
WARNING
Conditions for safe use
Equipment used in hazardous areas must be Ex-approved and marked accordingly. It is
required that the special conditions for safe use provided in the manual and in the Ex
certificate are followed!
Ex approvals
CSA
Class I, Division 2, Groups A, B, C and D. Code T5 for an ambient temperature of +60 °C.
FM Class I, Division 2, Groups A, B, C and D and Class I, Zone 2, Group IIC indoor/outdoor
Type IP67 hazardous (classified) locations.
Safety notes
2.3 Installation in hazardous location
SITRANS FM MAG 5000/6000 IP67
12 Operating Instructions, 12/2019, A5E02338368-AD
To Next Page
Loading...
