Safety Notes
DANGER
Danger during electrical inspection
Noncompliance with the safety notes will result in death, severe injury or considerable material
damage.
²
Comply with all given safety notes when carrying out the electrical inspection.
²
Note that hazardous voltages are present when you perform the electrical inspection.
²
During the electrical inspection, check that the device becomes ready for operation once it has been
connected to the power supply.
Performing the Electrical Inspection
²
Connect the power supply, where applicable for the devices ordered with auxiliary supply option.
²
Activate the power supply.
²
If the device does not assume the normal operating state (process mode), switch off the power supply.
Disconnect the wiring and the earthing.
²
Pack this device and return it to the manufacturer, stating the defect. Use transport packaging that meets
the requirements of standard ISO 2248.
First Steps
1.3 Electrical Inspection
18 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020
To Next Page