Fire brigade call station (AT) PT2002
Operation PT2002-A1
6
A6V10430571_en--_c 25 | 57
6.2 Operation PT2002-A1
Transmitting a manual announcement / Triggering an
evacuation with a manual announcement
1. Remove the microphone from the housing.
a All zones are selected for this alarm message.
2. Press the talk button on the microphone and hold the talk button while
talking into the microphone at a normal sound level.
a The microphone is activated.
a Already active announcements or background music are deactivated.
a A manual announcement is made in all zones.
3. Release the talk button after the announcement.
a The microphone is deactivated.
4. Put the microphone back in the housing.
Playing a recorded announcement / Triggering an evacuation
with a recorded announcement
1. Press a button labeled with the required announcement.
a Already active announcements are deactivated in all zones.
a The announcement is made in all zones.
a With the corresponding configuration, the announcement is also emitted
via the integrated speaker.
a The announcement is continually repeated.
2. Press <RESET / ACOUSTIC OFF> to end the announcement.
Resetting the fault message
w LED 'FAULT' lights up.
◈
Press <RESET/ACOUSTIC OFF>.
a LED 'FAULT' turns off.
a The fault in the system has been rectified.
a The fault message is reset.
Recurring fault messages
w The LED 'FAULT' lights up again.
w The fault in the system has not been rectified.
◈
Inform Siemens customer support.
a Request that maintenance be carried out by technical personnel.
To Next Page
Loading...
Need help?
General
