Siemens Cerberus PACE - Indicator PT2001-A1

Desk call station (19 buttons) PT2001
-
A1
Indicator PT2001-A1
8
32 | 57 A6V10430571_en--_c
8.3 Indicator PT2001-A1
Color Status Default Description
LED ON (5)
Green On x System is in regular operating mode
Red On -
Call station is in alarm mode with activated alarm key or station
priority is configured to 8 or higher
- Off - Call station is not working (no power)
LED Online (4)
Correct function must be configured with 'PACE-Design':
Error logging 'Fault-Relay-Setting'
View area:
– Local fault – only faults on this station
– RSL error – faults of station in RSL list
– Global system fault – any fault in the system
Green On x Call station is connected, and SD card is ok;
and there’s no fault in the configured view area
Yellow On - One of the following:
● SD card not working
● Microphone error (with 'Check Mike' activated)
● Network not connected and OEM ID=0 configured
● Fault in the configured view area
Yellow Blinking - Network is not connected and OEM ID=1501 is configured
- Off - Call station is not working (no power)
Zone
Button (3) is configured as 'Zone'
Green On - Zone is selected
Green On -
Zone is activated via the 'Talk' button and the station priority is
set to 1-7
Green On -
Zone is activated via the 'PLAY Sound', and the file is a standard
file (non-alarm)
Red On -
Zone is activated via the 'Talk' button and the station priority is
set to 8 or higher
Red On -
Zone is activated via the 'PLAY Sound' and the file is an alarm
file
Red
Slow
blinking
-
Zone is activated via the 'Logic input' and the station priority is
set to 1-7
Red
Fast
blinking
-
Zone is activated via the 'Logic input' and the station priority is
set to 8 or higher
Yellow On - Zone fault during an alarm event
- Off x Zone is not selected and is not activated
Talk
Green On - Microphone is activated and played in selected zone
Green Blinking -
Microphone is in standby and pre-announcement tone is played
in selected zone
- Off x Microphone is not activated