Desk call station (analog, 3+1) PT2008
Operation PT2008-A1
11
A6V10430571_en--_c 39 | 57
11.2 Operation PT2008-A1
Transmitting a manual announcement
● Talk button configured as switch
1. Select a zone or several zones by pressing the relevant labeled buttons.
a Selected zone buttons light up.
2. Press the talk button for the manual announcement.
a The microphone is activated.
3. Talk into the microphone at a normal sound level.
a Already active announcements are deactivated in the selected zones.
a A manual announcement is made in the selected zones.
4. Press the talk button to stop the manual announcement.
a The microphone is deactivated.
5. Press the selected zone buttons again.
a The button lighting turns off.
● Talk button configured as button
1. Select a zone or several zones by pressing the relevant labeled buttons.
a Selected zone buttons light up.
2. Press and hold the talk button for the manual announcement.
a The microphone is activated.
3. Talk into the microphone at a normal sound level.
a Already active announcements are deactivated in the selected zones.
a A manual announcement is made in the selected zones.
4. Release the talk button to stop the manual announcement.
a The microphone is deactivated.
5. Press the selected zone buttons again.
a The button lighting turns off.
Playing a recorded announcement
1. Select a zone or several zones by pressing the relevant labeled buttons.
a Selected zone buttons light up.
2. Press a button labeled with the required announcement.
a Already active announcements are deactivated in the selected zones.
a The announcement is continually repeated.
3. Press the button with the required announcement again to end the
announcement.
4. Press the selected zone buttons again.
a The button lighting turns off.
To Next Page
Loading...
