Siemens Cerberus PACE - Operation PT2005-A1; Indicator PT2005-A1

Alarm control panel (19") PT2005
-
A1
Operation PT2005-A1
15
A6V10430571_en--_c 49 | 57
15.2 Operation PT2005-A1
Activating the alarm
◈
Press the red <Initiate / Auslösen> indicator button.
a The alarm is activated in the system.
Resetting the alarm manually
◈
Press the black <Reset / Rückstellen> button.
a The alarm is reset.
Silencing the alarm manually
◈
Press the green <Silence / Stumm> indicator button.
a The alarm is silenced.
Acknowledging a fault warning
◈
Press the black <Fault Indication Reset / Quittieren Störung> button.
a The fault warning is acknowledged.
Resetting the fault message
w LED 'FAULT' lights up.
w The fault in the system has been rectified.
◈
Press <Buzzer reset/Test – Quittierung/Test>.
a LED 'FAULT' turns off.
a The fault message is reset.
Recurring fault messages
w The LED 'FAULT' lights up again.
w The fault in the system has not been rectified.
◈
Inform Siemens customer support.
a Request that maintenance be carried out by technical personnel.
15.3 Indicator PT2005-A1
Color Status Default Description
Start Voice Alarm
Red On - A voice alarm is activated manually
- Off x A voice alarm is not activated manually
Silence Voice Alarm
Green On - A voice alarm is silenced manually
- Off x A voice alarm is not silenced