EasyManua.ls Logo

Siemens Cerberus PACE - 5 Access Levels

Siemens Cerberus PACE
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Access levels
5
22 | 57 A6V10430571_en--_c
5 Access levels
The access level describes one of several conditions of voice alarm control and
indicating equipment (VACIE) in which an appropriately authorized user can
have access to or a view of the following functions on the system:
Activating operating elements
Performing operations
Viewing indicators and/or information
Access authorization is implemented on a
country
-
specific basis and can be
enabled using the following protective measures, for example:
Keyboard shortcut
Key switch
Locked cabinet door
Closed room
Other
Access levels 1…4 have the following properties:
Access level 1
Access level 1 is accessible to everyone or, depending on the configuration of
the voice alarm system, to authorized persons with a general responsibility for
monitoring safety.
Access level 2
Access level 2 is accessible to trained and authorized persons who are
responsible for safety.
In access level 2, the VACIE can be operated in the following operating
conditions:
Quiescent condition
Voice alarm condition
Fault warning condition
Access level 3
Access level 3 is accessible to trained and authorized persons for the following
rights and tasks:
Changing system-specific data which is saved within the VACIE or
controlled by it:
Designations
Allocation to voice alarm zones
Alarm organization
Saving and changing emergency tones and messages
Servicing the VACIE in accordance with the instructions and data from the
manufacturer
Access level 4
Access level 4 is accessible to persons who have been trained and authorized
by the VACIE manufacturer for the following rights and tasks:
Servicing the VACIE
Changing the firmware
Changing fundamental functions

Table of Contents

Related product manuals