Siemens Climatix S300 HRV - 4.5 Configuring the hardware

4.5 Configuring the hardware
The I/Os on the controller board and peripheral devices do not have a designated
function. Only for the controller board, the I/Os for default functions are set (see
“Default configuration [➙48]”).
Depending on the application and the functions selected in Basic configuration, the
required I/O signals must be set at the desired terminals.
Controller board
T4
L
N
T1
T18
T2
T16
T11
T12T15
Heat Sink
SELV Area
KNX+
KNX-
Ref
-
+
Ref
-
+
Ref
-
+
24V=
24V=
5V=
X1
X2
X3
A1
A2
A3
A4
X8
B1
B2
B3
B4
T3
T7
T14
T19
D1
Ref1
D2
Q13
Q14
Q23
Q24
Q33
Q34
C
Y1
T6
T5
A6V11417931Z06
HV Area
Configuration
Configuring the hardware
4
A6V10733786_en_c 33 | 170