Siemens CP 343-1 User Manual

References
B.3 On programming
CP 343-1
Manual, 12/2018, C79000−G8976−C201-08
73
/7/
SIMATIC
Programming with STEP 7
Siemens AG
(Part of the STEP 7 documentation package STEP 7 Basic Knowledge)
(Part of the online documentation in STEP 7)
18652056 (http://support.automation.siemens.com/WW/view/de/18652056)
/8/
SIMATIC
System and Standard Functions for S7-300/400
Programming manual
Siemens AG
1214574 (http://support.automation.siemens.com/WW/view/de/1214574)
/9/
SIMATIC NET
Industrial Communication with PG/PC Volume 1 - Basics
System manual
Siemens AG
(SIMATIC NET Manual Collection)
On the Internet under following entry ID:
Link: (https://support.industry.siemens.com/cs/ww/en/view/77376110)
SIMATIC NET
Industrial Communication with PG/PC Volume 2 - Interfaces
Programming manual
Siemens AG
(SIMATIC NET Manual Collection)
On the Internet under following entry ID:
Link: (https://support.industry.siemens.com/cs/ww/en/view/77378184)
/10/
SIMATIC NET
Program blocks for SIMATIC NET S7 CPs
Programming Manual
Siemens AG
Link: (https://support.industry.siemens.com/cs/ww/en/view/62543517)
/11/
Automatisieren mit STEP 7 in AWL und SCL (ISBN: 978-3-89578-280-0) /
Automating with STEP 7 in STL and SCL (ISBN: 978-3-89578-295-4)
User manual, programming manual
Berger, Hans
Publicis KommunikationsAgentur GmbH, GWA, 2006

Siemens CP 343-1 Specifications

General

Product Type Designation	CP 343-1
Power Supply	24 V DC
Protection Class	IP20
Product Type	Communications processor
Interface	Ethernet
Data Transmission Rate	10/100 Mbit/s
Protocols Supported	TCP/IP, UDP
Number of Ports	1
Operating Temperature	0 to 60 °C