10/70
Siemens PXM20 / PXM20-E operator unit CM110754en_02
Building Technologies Display and control elements 17 Dec 2009
2.1.3.5 The info key <?>
Pressing the <?> key once takes you into "Info" mode. A question
mark at the end of a line indicates that you can display information
associated with this line. To do this, press the associated direct
access key.
Figure 2-2
Figure 2-3 Example: "Setpoint for cooling"
Pressing the <?> key again displays a dialog box with general
information about the associated window.
To Next Page
Loading...
