Siemens DESIGO PXM20 - Remove User; Change Password; Edit User

42/70
Siemens PXM20 / PXM20-E operator unit CM110754en_02
Building Technologies Access rights 17 Dec 2009
8.4 Remove user
To remove a user, proceed as follows:
Note
You can only remove users at a lower level in the hierarchy.
1 In the current site, select Alarming & functions >
User definition.
2 Select Remove user. The next dialog box displays a list of all the
users which your access rights entitle you to delete.
3 Select the user to be removed.
4 Confirm your instructions in the next pop-up window.
8.5 Change password
o change your own password, proceed as follows:
1 In the current site, select Alarming & functions >
User definition.
2 Select Change password.
The following prompt will then appear:
3 Enter OLD password:
Enter your old password and confirm with OK.
The following prompt will then appear:
4 Enter NEW password:
Enter your new password and confirm with OK.
5 The change of password is confirmed in a pop-up window.
8.6 Edit user
Proceed as follows to change the data for a given user:
1 In the current site, select Alarming & functions >
User definition.
2 Select Edit user.
The next dialog box displays a list of all the users which your
access rights entitle you to modify or delete.
3 Select the user, for which you want to edit the data.
4 Make the required changes and confirm them by selecting SAVE
USER.