Siemens DESIGO PXM20 - Main Value; Welcome Window; Third-Party Site

24/70
Siemens PXM20 / PXM20-E operator unit CM110754en_02
Building Technologies Settings 17 Dec 2009
3.2.13 Main value
This setting lets you specify that when operating the plant, the main
value should appear at the end of the line for the object concerned.
3.2.14 Welcome window
Here you can define whether a "Welcome" window is to appear
when a user logs in.
3.2.15 Third-party site
Use this option to specify whether or not third-party devices are to be
operated with the PXM20.
In third-party devices, the following BACnet objects can be
displayed:
 Analog Input/Output/Value objects
 Binary Input/Output/Value objects
 Multistate input/Output/Value objects
 Calendar object
 Device object
Notes
Only a subset of the standard properties, as in the BACnet
standard, is displayed.
In the context of PXM20 and PXM20-E, the term "third-party" or
"devices from third-party manufacturers" is used to refer to "non-PX
devices".