Siemens DESIGO PXM20 - Selecting an Event or Alarm

36/70
Siemens PXM20 / PXM20-E operator unit CM110754en_02
Building Technologies Alarms 17 Dec 2009
All recently received alarms are listed in this dialog box.
Each line consists of an alarm symbol, the object name or
notification text, and the date and time.
The Alarm viewer tracks the state of an alarm as follows: If the
alarm state changes (e.g. an alarm is acknowledged) the associated
entry also changes.
Note
Note that for each object, only the current alarm, i.e. the last alarm
received, is displayed.
When a fault has been cleared and acknowledged the relevant entry
disappears from the list.
7.2.2 Selecting an event or alarm
5. Select the alarm which you wish to acknowledge. The Alarm
message dialog box will appear.
6. You can now select either ACKNOWLEDGE or DETAILS.
The procedure for events is basically the same as for alarms.
Unlike alarms, however, you do not need to acknowledge events.
Tracking the
alarm state