37/70
Siemens PXM20 / PXM20-E operator unit CM110754en_02
Building Technologies Alarms 17 Dec 2009
7.2.3 Alarm acknowledgement / Alarm &
Event details
Select ACNOWLEDGE to acknowledge the alarm. The Alarm
viewer dialog box will re-appear (Figure 7-2).
By selecting DETAILS you can switch to a dialog box which provides
more information about the object responsible for triggering the
alarm or event, and which displays the priority of the alarm message.
Figure 7-3 Alarm details
Figure 7-3 Event details
OBJECT PROPERTIES lets you navigate directly to the alarm
source. Press ESC to return to the Alarm viewer.
Your user access rights will determine whether or not you have
access to Object properties.
Note
To Next Page
Loading...
