41/70
Siemens PXM20 / PXM20-E operator unit CM110754en_02
Building Technologies Access rights 17 Dec 2009
3 You will be prompted in the next dialog box to enter the user
name:
4 Select the required characters and use the <+> key to enter them
in the field. Use the <–> key, if required, to delete characters.
5 Acknowledge the user name with OK.
6 You will then be prompted to enter the password: Please enter
the PASSWORD
Enter the required password and confirm with OK
A list of all the information describing the newly defined user will now
appear. You now have the option of modifying or adding to the
information or settings:
7 User group
Select the required user group
8 User visa
Select initials for the user you have defined
9 Answer the prompt to save the new user entry:
SAVE USER
The display will revert to the User definition dialog box
To Next Page
Loading...
