Index
Index-4
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Digital electronic module 4DO 24 VDC/0.5 A
Standard
block diagram, 11-46
features, 11-44
technical specifications, 11-47
terminal assignment, 11-44
Digital electronic module 4DO 24 VDC/2 A
Standard, 11-56
block diagram, 11-58
features, 11-56
technical specifications, 11-59
terminal assignment, 11-56
Digital electronic module error types, 6-41
Digital electronic modules, 6-14, 11-1
Digital input modules, 6-4
Digital output modules, 6-4
Dimension drawings, B-1
Distributed I/O system – ET 200S, 1-12
Distributed I/O system – ET 200S
area of application, 1-4
definition, 1-4
terminal and electronic modules, 1-4
view of, 1-5
Distributed I/O systems – area of
application, 1-2
Documentation package, v
DP master, 1-2
DP slave, 1-2
E
Electromagnetic compatibility, 7-6
Electronic module, 1-7, 3-8, 5-26
changing type, 5-26
replacing, 5-27
Electronic modules, 3-12, 5-23, 5-25, 5-27, 9-2
identifying, 5-23
inserting, 5-23
removing, 5-25
removing and inserting during
operation, 5-27
Electronic modules and applications, 3-8
Electrostatic discharge, 7-6
EMC, 7-6
Emergency stop devices, 5-2
Emission of radio interference, 7-7
ET 200S, 5-3, 5-4, 5-5, 5-6
electrical design, 5-6
features and benefits, 1-8
operating on a grounded supply, 5-3
overall configuration, 5-5
with grounded reference potential, 5-4
ET 200S, 6-2, 6-10
configuring, 6-2
Example configuration of a fiber-optic cable
network with the IM151-1 FO
STANDARD, 3-7
Examples of ET 200S setups, 3-2
F
FB192, 6-27
Fiber-optic cable, order number, A-7
Fiber-optic cable duplex line, 1-8
Fiber-optic cable, bending radius, 5-22
Finely-graduated modular system, 3-1
FM, approval, 7-4
Four-wire measuring transducers, 12-45
Fundamentals, 12-41
G
General rules, 5-1
General technical specifications, 7-1
Grounded supply, 5-3
Guide, to the manual, vi
I
Identification for Australia, 7-4
IEC 204, 5-2
IEC 61131, 7-4
IEC 61784-1:2002 Ed1 CP 3/1 , 1-3
IM151-1 BASIC/IM151-1 STANDARD/IM151-1
FO STANDARD/IM151-1
HIGH FEATURE, 6-12
status and error displays, 6-12
IM151-1 FO STANDARD, connector
adapter, 5-21
Installation, 4-1, 4-4, 4-10, 4-11, 4-12, 4-13
color identification labels, 4-13
interface module, 4-4
shield contact, 4-11, 4-12
slot number labels, 4-13
terminating module, 4-10
Installation measurements, 4-3
Installation position, 4-2
Installation rules, 4-2
Installing simplex connectors, 5-21
Insulation testing, 7-10
Integrating the device database file in the
configuration software, 6-3
Interface module, 3-5
To Next Page
Loading...
