Siemens ET 200S - Page 561

Index
Index-5
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Interface module IM151-1, 1-6
Interface module IM151-1 BASIC, 8-7, 8-8
block diagram, 8-8
parameters, 8-1
technical specifications, 8-9
terminal assignment, 8-8
Interface module IM151-1 FO
STANDARD, 8-13, 8-14
block diagram, 8-14
technical specifications, 8-15
terminal assignment, 8-14
Interface module IM151-1 HIGH FEATURE,
8-16, 8-17
block diagram, 8-17
parameters, 8-2
technical specifications, 8-18
Interface module IM151-1
STANDARD, 8-10, 8-11
block diagram, 8-11
technical specifications, 8-12
terminal assignment, 8-11
Interface modules, 8-1
Interface modules and applications, 3-5
Interface modules IM151-1 STANDARD and
IM151-1 FO STANDARD, parameters, 8-2
Interference frequency suppression, 12-68
Isolated measuring sensors, 12-43
Isolation, 5-6
L
Labeling sheet, 1-8
Leakage resistance, E-1
Length of the diagnostic message frame, 6-26
Lines for analog signals, 12-42
M
Manual, purpose, iii
Manual package, 1-12
Manuals, other, vi
Manufacturer ID, 6-33
Mark of conformity
CE, 7-2
CSA, 7-3
Master PROFIBUS address, 6-33
Maximum configuration, 3-30
Measured-value resolution, 12-6
Measuring ranges of the analog input modules
in SIMATIC S5 format, 12-21
Measuring ranges of the analog input modules
in SIMATIC S7 format, 12-8
Measuring ranges with SIMATIC S7, 12-6
Measuring sensors, 12-41
Mechanical environmental conditions, 7-9
Minimum clearances, 4-4
Minimum clearances for installation, wiring,
and ventilation, B-1
interface module, B-2
shield contact, B-10
terminal modules with an electronic module
inserted, B-3, B-7
terminating module, B-10
Module diagnosis, 6-34
Module status, 6-35
Motor starter – ET 200S, 1-12
Motor starters, 6-4
N
No grouping, 6-9
Non-isolated measuring sensors, 12-45
O
Options, 6-26
Order numbers, A-1
analog electronic modules, A-5
digital electronic modules, A-3
ET 200 manual in SIMATIC S5, A-10
ET 200S accessories, A-6
interface module, A-1
network components for the ET 200, A-7
power modules, A-3
process-related modules, A-5
RESERVE modules, A-6
STEP 7 and SIMATIC S7 manuals, A-8
technical guide to PROFIBUS-DP with
SIMATIC S7 and STEP 7, A-10
terminal modules, A-2
Order numbers for the brief guide, 2-2
Oscillations, 7-9
Output ranges, 12-18
Output ranges of the analog output modules in
SIMATIC S5 format, 12-22, 12-40