20
If the panel is configured for Supervisory/Trouble Resound Reminder, and the supervisory
condition is not corrected, the local panel buzzer will re-activate when the reminder timer has
relapsed to remind users of the supervisory condition.
If the FC2005 is configured as “Supervisory self-restoring”, the system shall return to the
“System Normal” status when the supervisory condition is restored unless there are additional
events on the system. If the FC2005 is not configured as “Supervisory self-restoring”, the
system reverts to standby condition only after the RESET button is pressed.
To Next Page
Loading...
Need help?
General
