Siemens FC2005 User Manual

72
LCD Display
A 160 by 64 dot LCD display is used to display information such as event types, event amount,
event location, user level, releasing timer, etc. A back light is included in the display to assure
visibility in dim light. To save power, the back light is only activated during a reported event or
on operation of a display control button.
The LCD display has altogether 7 lines, and each line displays 26 characters. It displays two
events at a time. Users can cycle through a circular list once the first event or last event
message is reached.
LCD display in Canada
The text displays in the below graphic and table is just an example. The actual display
corresponds to the actual situation.
Line
Current text
Description
1
Alarm
Current event type
01/03
Current event/total events
L1
Access level
11:15
System time
2
V
Possible display:
V: The event is acknowledged
!: The event is unacknowledged
ALM
Current event type
ManualAlarm
Specific current event type
Manu
Connects to the content in line 3
3
al Alarm Zone1
Event location (see complete information together with the last 4
characters in line 2)
I
Possible display: I/O (in or out flag)
4
V
Possible display:
V: The event is acknowledged
!: The event is unacknowledged
ALM
Current event type
ManualAlarm
Specific current event type
1234
Connects to the content in line 2
5
567890123456789012345678.
User defined (Max. 30 characters; see complete information
together with the last 4 characters in line 2)
I
Possible display: I/O (in or out flag)
6, 7
003 ALM
Alarm event amount
004 SUP
Supervisory event amount
006 TBL
Trouble event amount
000 OTH
Other event amount
RCtl1:60
RCtl2:60
Releasing timer name and releasing count down time (60 s by
default; Max. 60 s; DIS (discharge) is displayed after count
down.)
firealarmresources.com

Siemens FC2005 Specifications

General

Brand	Siemens
Model	FC2005
Category	Control Panel
Language	English