Siemens HiPath 4000 - Fitting the Attachment Clip; Setting the Handset Display Language

Putting the handset into service
21
Step by Step
Fitting the attachment clip
The handset comes with a second battery cover that
features a stud for the attachment clip. Fit the attach-
ment clip as follows:
1. Open the battery compartment
(Æ Page 17)
2. Replace the battery cover
Replace the battery cover you removed with the one
with the stud.
3. Close the battery compartment
(Æ Page 17)
4. Fit the attachment clip
(Æ Page 17)
Setting the handset display language
If your preferred language for handset display texts is
not set as the default, you can set this yourself. The lan-
guage of communication system display texts can only
be set by the administrator.
Opening the main menu
© Open the main menu of the handset.
Opening the first submenu
either:
st
[Select the menu item and confirm.
or:
st
[Select the menu item and confirm.
Opening the second submenu
either:
st
[Select the menu item and confirm.
or:
st
[Select the menu item and confirm.
H/Set Settings
Ð
Einstellungen
Ð
Handset
Mobilteil