Siemens HiPath 4000 - Making Calls Using Project Assignment (Cost Billing)

Step by Step
Conducting calls – enhanced functions
56
Making calls using project assignment
(cost billing)
Calls made to external partners can be assigned to spe-
cific projects.
Prerequisite: Project numbers (from 1 to 5) have been
configured for certain projects, and you have an account
code (ACCT) for the project.
u Call the system menu.
> < [ Select and confirm the basic service.
> < [ Select the menu item and confirm.
> < [ Select the required PIN and confirm.
o Enter an external phone number.
Then make your phone call as usual (Æ Page 4).
BASIC SERVICE
PIN/COS
PIN 1?
...
A time limit is applied to project assignment. It is
automatically deactivated if you have not used
your handset for a period of more than five min-
utes, for instance.