Step by Step
Conducting calls – with multiple users
78
Setting up a conference
You can set up a conference from any of the following
types of connection:
• Single call
• Consultation call
•Camp-on
Starting a conference from a single call
You want to set up a conference.
p You are on a call.
> < [Select the menu item and confirm.
o Call the second user.
Announce that a conference is to be set up.
> < [Select the menu item and confirm. You will briefly see
the message: "1 is your position".
Setting up a conference from a consultation call
p You are connected to one user and you call a second us-
er.
[ Confirm.
o Call the second user. The second user answers, you an-
nounce the conference.
> < [Select the menu item and confirm. You will briefly see
the message: "1 is your position".
Setting up a conference from a second call
p You are connected to one user and receive a second
call, which is signalled by a warning tone.
> < [Select and confirm. You are connected to the second
caller. The other party is placed on hold.
> < [Select the menu item and confirm. You will briefly see
the message: "1 is your position". All members are
connected in a conference call.
START CONF.
CONFERENCE
Conf.
EXPAND CONF.
CONSULT
CONFERENCE
PICKUP
CONFERENCE
To Next Page
Loading...
