Siemens HiPath 4000 - Changing the Emergency Number; Activating;Deactivating Automatic Call Answering

Setting the handset
31
Step by Step
Changing the emergency number
© Open the main menu of the handset.
st [Select the menu item and confirm.
st
[Select the menu item and confirm.
st
[Select the menu item and confirm. If the check box is
unmarked, then there is no emergency number set.
X Delete the old emergency number.
o Enter the new emergency number.
Save setting.
Press the On-hook key to end the operation.
Activating/deactivating automatic call
answering
This function allows you to accept calls by removing the
handset from the charging shell.
© Open the main menu of the handset.
st [Select the menu item and confirm.
st
[Select the menu item and confirm.
st
[Select the menu item and confirm.
Automatic answering is activated.
The activated function is ticked and can be deactivated
by selecting it once more.
Press the On-hook key to end the operation.
H/Set Settings
Ð
Handset
Add. Emerg. No Õ
Save
H/Set Settings
Ð
Handset
Auto Answer Õ