Siemens HiPath 4000 - Page 90

Step by Step
Conducting calls – with multiple users
80
Accepting a second call and adding it to the
conference
If you receive a second call during the conference (the
second call function is activated), you can add this user
to the conference.
An alerting tone is audible.
> < [ Select and confirm. You are connected to the second
caller. The conference is placed on hold.
either:
> < [Select and confirm to add the second caller to the con-
ference.
or:
> < [Toggle between the conference and the second call.
or:
> < [Select and confirm to release the second call and return
to the conference.
PICKUP
CONFERENCE
TOGGLE
RETURN