Siemens Hipath 5000 - 2 Startup; Prerequisites; Assembly

inbetriebnahme.fm
A31003-01010-M11-1-7619, 29/01/2007
HiPath 2000, HiPath 3000/5000, HiPath 4000 - OpenStage 60/80, Administrator Manual
2-1
Startup
Prerequisites
2Startup
2.1 Prerequisites
The advance acts as an endpoint client on an IP telephony network, and has the following net-
work requirements:
• An Ethernet connection to a network with SIP clients and servers
• One of the following SIP environments:
• HiPath 8000 server
• Sylantro server
• Broadsoft server
• Any SIP server (generic features only)
• An FTP Server for file transfer, e. g. firmware, configuration data, application software
• A Dynamic Host Configuration Protocol (DHCP) server (recommended).
2.2 Assembly
Shipment
• Phone
• Handset
• Handset cable
• Subpackage:
• Document „Information and Important Operating Procedures“
• Emergency number sticker
• Emergency Number Sticker
7
Only use switches in the LAN, to which the OpenStage 60/80 is connected. An
operation at hubs can cause serious malfunctions in the hub and in the whole
network.