Siemens Hipath 5000 Administrator's Manual

Startup
A31003-01010-M11-1-7619, 29/01/2007
2-6 HiPath 2000, HiPath 3000/5000, HiPath 4000 - OpenStage 60/80, Administrator Manual
inbetriebnahme.fm
Quick Start
2.4.2 Set the Terminal Number
If the user and administrator menus are needed in the course of setup, the terminal number,
which by default is identical with the phone number, must be configured first. The terminal num-
ber input form is presented to the user/administrator right after booting, unless the Plug&Play
facility of the DLS is used. For further information about this setting, please refer to Section
3.4.1.1, “Terminal Identity”. With the WBM, the teminal number is configured as follows:
4. In the left column, select System > System Identity to open the „System Identity“dialog. En-
ter the terminal number, i. e. the SIP name / phone number.

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English