Siemens Hipath 5000 - Registering at the Hipath 8000

inbetriebnahme.fm
A31003-01010-M11-1-7619, 29/01/2007
HiPath 2000, HiPath 3000/5000, HiPath 4000 - OpenStage 60/80, Administrator Manual
2-25
Startup
Quick Start
2.4.9 Registering at the HiPath 8000
For registration at the HiPath 8000 SIP server, a SIP user ID and passwort must be provided
by the phone. The following procedure describes the configuration using the web interface (see
Section 2.5.1, “Access the Web Interface (WBM)”; if the web interface is not applicable, please
refer to Section 3.4.5, “Authenticated Registration”):
1. In the administration menu, select System > Registration. The „Registration“ dialog opens.
2. In the Server type field, enter „HiQ8000“.
3. In Realm, enter the SIP realm the targeted user/password combination refers to.
4. In the User ID and Password fields, enter the user name/password combination for the
phone.