Siemens Hipath 5000 Administrator's Manual

administration.fm
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual
3-83
Administration
Speech
3.10 Speech
3.10.1 RTP Base Port
This parameter sets the port to be used for speech data, which is transmitted by RTP (Real-
Time Transport Protocol).
Administration via WBM
Network > Port Configuration
Administration via Local Phone
3.10.2 Codec Preferences
If Silence suppression is activated, the transmission of data packets is suppressed on no con-
versation, that is, if the user doesn’t speak.
The OpenStage 60/80 provides the codecs G.711, G.722, and G.729. When a SIP connection
is established between two endpoints, the phones negotiate the codec to be used. The result
of the negotiation is based on the general availability and ranking assigned to each codec. The
administrator can allow or disallow a codec as well as assign a ranking number to it.
The Packet size, i. e. length in milliseconds, of the RTP packets for speech data, can be set to
10ms or 20ms or to automatic detection.
Data required
|
--- Administration
|
--- Network
|
--- Port Configuration
|
--- RTP base

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English