inbetriebnahme.fm
A31003-01010-M11-1-7619, 29/01/2007
HiPath 2000, HiPath 3000/5000, HiPath 4000 - OpenStage 60/80, Administrator Manual
2-23
Startup
Quick Start
2.4.8.2 Using Option #43 „Vendor Specific“
Alternatively, option #43 can be used for setting up the DLS address. Two tags are required:
• Tag 001: Vendor name
• Tag 003: DLS IP address
Additionally, you can enter a host name for the DLS server:
• Tag 004: DLS hostname
The data is entered in hexadecimal values. Note that the length of the information contained in
a tag must be given.
The Vendor name tag is coded as follows (the first line indicates the ASCII values, the second
line contains the hexadecimal values):
The DLS IP address tag consists of the protocol prefix „sdlp://“, the IP address of the DLS serv-
er, and the DLS port number, which is „18443“ by default. The following example illustrates the
syntax:
Setup using the Windows DHCP Server
1. In the Windows Start menu, select Start > Programs > Administrative Tools > DHCP.
2. Select the DHCP server and the scope. Choose „Configure Options“ in the context menu
using the right mouse button.
Code Length Vendor name
1 7 Si emens
01 07 53 69 65 6D 65 6E 73
Code Length DLS IP address
3 25 sdl p: / / 192. 168. 3. 30: 18443
03 19
73
64
6C
70
3A
2F
2F
31
39
32
2E
31
36
38
2E
33
2E
33
30
3A
31
38
34
34
33
To Next Page
Loading...
