Siemens Hipath 5000 - Canonical Dial Lookup

Administration
A31003-01010-M11-1-7619, 29/01/2007
3-58 HiPath 8000 - OpenStage 60/80, Administrator Manual
administration.fm
Dialing
3.7.2 Canonical Dial Lookup
Up to 5 patterns can be defined for comparing numbers of incoming calls to numbers saved in
the phonebook. Thereby, the identification of callers from different local or international tele-
phone networks is enabled. The Local code 1 ... 5 parameters define up to 5 different local
area or city codes, whilst International code 1... 5 define up to 5 international codes.
Data required
• Local code 1 ... 5: Local area or city code.
• International code 1 ... 5: International code.
Administration via WBM
Locality > Canonical dial lookup
Administration via Local Phone
|
--- Administration
|
--- Local Functions
|
--- Locality
|
--- Canonical Dial Lookup
|--- Local code 1
|--- International code 1
|--- Local code 2
|--- International code 2
|--- Local code 3
|--- International code 3
|--- Local code 4
|--- International code 4
|--- Local code 5
|
--- International code 5