Siemens Hipath 5000 - Transferring Phone Software, Application and Media Files; FTP Server; Common FTP Settings

administration.fm
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual
3-59
Administration
Transferring Phone Software, Application and Media Files
3.8 Transferring Phone Software, Application and Media Files
3.8.1 FTP Server
There are no specific requirements regarding the FTP server for transferring files to the Open-
Stage 60/80. Any FTP server providing standard functionality will do.
3.8.2 Common FTP Settings
For each one of the various file types, e.g. phone software, hold music, and picture clips, spe-
cific FTP access data can be defined. If some or all file types have the parameters Download
method, Server, Server port, Account, Username, FTP path, and HTTPS baser URL in
common, they can be specified here. These settings will be used for a specific file type if its Use
defaults parameter is set to „Yes“.
Data required
• Download method: Selects the protocol to be used.
Value range: „FTP“, „HTTPS“.
• Server: IP address or hostname of the FTP/HTTPS server in use.
• Server port: Port number of the FTP/HTTPS server in use.
• Account: Account at the server (if applicable).
• Username: User name for accessing the server.
• Password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to „HTTPS“.
Administration via WBM
File transfer > Defaults
>
If Use defaults is activated for a specific file type, any specific settings for this file
type are overridden by the defaults.