Siemens Hipath 5000 - IP Address - Manual Configuration

administration.fm
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual
3-13
Administration
IP Network Parameters
3.3.3 IP Address - Manual Configuration
If not provided by DHCP dynamically, you must specify the phone’s IP address and subnet
mask manually.
Data required
• IP address: used for addressing the phone.
• Subnet mask: subnet mask that is needed for the subnet in use.
Administration via WBM
Network > IP configuration
Administration via Local Phone
|
--- Administration
|
--- Network
|
--- IP Configuration
|--- IP address
|
--- Subnet mask