inbetriebnahme.fm
A31003-01010-M11-1-7619, 29/01/2007
HiPath 2000, HiPath 3000/5000, HiPath 4000 - OpenStage 60/80, Administrator Manual
2-21
Startup
Quick Start
12. Select the Advanced tab. Under Vendor class, select the class that you previously de-
fined (OptiIpPhone) and, under User class, select Default User Class.
Activate the check boxes for the options that you want to assign to the scope (in the exam-
ple, 001 and 003)
13. The DHCP console now shows the information that will be transmitted for the correspond-
ing workpoints. Information from the Standard vendor is transmitted to all clients, whereas
information from the OptiIpPhone vendor is transmitted only to the clients (workpoints) in
this vendor class.
To Next Page
Loading...
