Virtual Network configuration
A31003-W1040-U101-1-7619, July 2006 DRAFT
138 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsconfiguration.fm
Authentication for a VNS
4. Click Auth. The Authentication fields are displayed.
5. From the RADIUS drop-down list, select the server you want to use for Captive Portal
authentication, and then click Use. The server’s default information is displayed.
The RADIUS servers are defined in the Global Settings screen. For more information, see
Section 6.8, “VNS global settings”, on page 116.
To Next Page
Loading...
