hwc_controlleravailmobility.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
209
Availability, mobility, and controller functionality
Enabling SNMP
8.6.2 Enabling SNMP on the HiPath Wireless Controller
You can enable SNMP on the HiPath Wireless Controller to retrieve statistics and configuration
information.
To enable SNMP Parameters:
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. In the left pane, click SNMP. The Simple Network Management Protocol screen
appears.
3. Type: the following information:
● Contact Name – Specifies the name of SNMP administrator
● Location – Specifies the location of the SNMP administration machine
● Read Community Name – Specifies the community name for users with read
privileges
To Next Page
Loading...
Need help?
General
