Need help?Do you have a question about the Siemens HydroRanger 200 and is the answer not in the manual?
General| Type | Ultrasonic level controller |
|---|---|
| Housing Material | Polycarbonate |
| Output | 4 to 20 mA |
| Communication Protocol | HART |
| Power Supply | 100 to 230 V AC |
| Enclosure Rating | IP66 |
| Temperature Range | -20 to 60 °C |
| Accuracy | ±0.25% of range |
| Approvals | CE, UL |
| Outputs | relay |
Details electrical power requirements for AC and DC versions, including fuse ratings.
Covers location, altitude, ambient temperature, and humidity requirements.
Details available mA analog and relay outputs, and communication protocols.
Guides on choosing optimal locations and provides step-by-step installation procedures.
Covers terminal board, transducer, relay, and communication wiring standards.
Step-by-step guide for installing the internal backup battery.
Explains the primary operating mode, display indicators, and readings.
Details entering programming mode and using the hand programmer for setup.
Comprehensive guide to all device parameters, their functions, and settings.
Identifies common issues, their causes, and recommended troubleshooting actions.
Discusses electrical and acoustical noise, and methods to determine their sources.
To Next Page