Page 30 HydroRanger 200 – INSTRUCTION MANUAL 7ML19985FC03
mmmmm
Operation
SIMATIC Process Device Manager (PDM)
(compatible with product software versions 1.07 and later)
1
SIMATIC PDM is a software package for parameterizing, commissioning, diagnosing and
maintaining process devices. For the HydroRanger 200 (all models), SIMATIC PDM
connects directly to the device using Modbus over Port 1 or Port 2.
The HydroRanger 200 (all models) comes with Port 1 set for communications to SIMATIC
PDM.
SIMATIC PDM contains a simple process monitor of the process values, alarms and
status signals of the device. Using SIMATIC PDM you can
•display,
• set,
• change,
•compare,
• check the plausibility of,
• manage, and
• simulate
process device data.
More information about SIMATIC PDM is available at
www.siemens.com/processinstrumentation
: go to Products and Solutions > Products and
Systems > Communication and Software > Process Device Manager. Please consult the
operating instructions or online help for details on using SIMATIC PDM. An Application
Guide on using HydroRanger 200 (all models) with PDM and Modbus is available on our
website: www.siemens.com/processautomation
.
Device Description
To use Process Device Manager (PDM) with HydroRanger 200 (all models), you need the
Device Description for HydroRanger 200 (all models), which will be included with new
versions of PDM. You can locate the Device Description in Device Catalog, under
Sensors/Level/ Echo/Siemens Milltronics. If you do not see HydroRanger 200 (all models)
under Siemens Milltronics, you can download it from our website: www.siemens.com/
processautomation. Go to the HydroRanger 200 product page and click Downloads. After
downloading the DD file, you need to execute DeviceInstall.
1.
See P900 for Software Revision Number.
To Next Page
Loading...
