hwc_regulatory_information.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
27
Regulatory information
AP2610 Internal Antenna AP, AP2620 External Antenna AP
2.2.5 Certifications of Other Countries
The AP2610 and AP2620 wireless access points have been certified for use in the countries
listed in the table below. When the AP26XX is connected to the Siemens controller, the user is
prompted to enter a country code. Once the correct country code is entered, the controller
automatically sets up the AP26XX with the proper frequencies and power outputs for that
country code.
Other Country Specific Compliance Standards, Approvals and Declarations
Australia and New Zealand
● AS/NZS 4288 (Radio via EU standards)
● AS/NZX 3260 (Safety via EU standards - ACMA)
● AS/NZS 3548 (Emissions via EU standards - ACMA)
● IEEE 802.11a/b/g
● IEEE 802.3af (PoE)
● EN 300 328-2:2003-04 (2.4 GHz)
● EN 301 893-1:2003-08 (5 GHz)
● EN 301 489-17:2002-08 (RLAN)
● IEC 60950-1:2001, 1st Edition with Australian Deviations
List of Supported 5 GHz Channels
>
It is the responsibility of the end user to enter the proper country code for the country
the device will be operated within.
Countries Supported Frequency
Bands
Supported Channel Numbers
Kuwait, Pakistan,
Russia, Thailand,
U.A.E., Venezuela,
Vietnam
5 GHz Operation
Not Supported
None
Australia 5.15-5.35 GHz
5.725-5.825 GHz
36, 40, 44, 48, 52, 56, 60, 64, 149, 153,
157, 161
Table 1 List of Permitted 5 GHz Channels for Other Countries
To Next Page
Loading...
