Regulatory information
A31003-W1040-U101-1-7619, July 2006 DRAFT
18 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_regulatory_information.fm
AP2610 Internal Antenna AP, AP2620 External Antenna AP
● AS/NZS 3260 (Australia/New Zealand ACMA Safety of ITE)
● US 21 CFR Subpart J 1002.10, 1002.12 (Safety of Laser Products)
● CDRH Letter of Approval (US FDA Laser Approval)
● IEC/EN 60825 (Safety of Laser Products)
EMC (Emissions / Immunity)
● FCC Part 15, Subpart B, Class A (North America)
● ICES-003, Class A (Canadian Emissions)
● 89/336/EEC EMC Directive
● EN 55022:1998 A2:2003 Class A (European Emissions)
● EN 55024:1998 A2:2003 includes EN 61000-2,3,4,5,6,11 (European Immunity)
● EN 61000-3-2:2000 Class A (Harmonics)
● EN 61000-3-3:1995 A1:2001 (Flicker)
● IEC/CISPR 22:1997 Class A (International Emissions)
● IEC/CISPR 24:1998 includes IEC/EN 61000-4-2,3,4,5,6,11 (International Immunity)
● Australia/New Zealand AS/NZS 3548 via EU standards (ACMA)
RoHS
● European Directive 2002/95/EC
2.2 AP2610 Internal Antenna AP, AP2620 External Antenna AP
The AP26XX is Wi-Fi certified under Certification ID # WOO2422 for operation in accordance
with IEEE 802.11a/b/g. The AP26XX wireless access points with Internal and External
antennas are designed and intended to be used indoors.
2.2.1 United States - FCC Declaration of Conformity Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
>
Operation in the European Community and rest of the world may be dependant on
securing local licenses/certifications/regulatory approvals.
To Next Page
Loading...
Need help?
General
