Siemens HiPath AP2620 User Manual

hwc_vnsconfiguration.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
183
Virtual Network configuration
Configuring Quality of Service (QoS)
7.11.1 Defining the service class for the VNS
Service class is determined by the combination of the following operations:
● The class of treatment given to a packet. For example, queuing or per hop behavior (PHB).
● The packet marking of the output packets (user traffic and/or transport).
Table 17 Service class
>
At this time, Layer 2 802.1d bits are not carried across the tunnel. The HiPath
Wireless Controller C2400 supports functionality (CTP_QoS field) by which L2
priority flags for user traffic received from a core VLAN is copied into the CTP header
(CTP_QoS field) and passed to the AP to determine the corresponding access
class.
Service class name (number) Priority level
Network Control (7) 7 (highest priority)
Premium (Voice) (6) 6
Platinum (video) (5) 5
Gold (4) 4
Silver (3) 3
Bronze (2) 2
Best Effort (1) 1
Background (0) 0 (lowest priority)

Siemens HiPath AP2620 Specifications

General

Brand	Siemens
Model	HiPath AP2620
Category	Controller
Language	English