EasyManua.ls Logo

Siemens HiPath AP2620 - Privacy for a VNS for AAA

Siemens HiPath AP2620
300 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Virtual Network configuration
A31003-W1040-U101-1-7619, July 2006 DRAFT
170 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsconfiguration.fm
Configuring privacy for a VNS
8. To enable re-keying after a time interval, select Broadcast re-key interval.
If this checkbox is not selected, the Broadcast encryption key is never changed and the
Wireless AP will always use the same broadcast key for Broadcast/Multicast
transmissions. This will reduce the level of security for wireless communications.
9. In the Broadcast re-key interval box, type the time interval after which the broadcast
encryption key is changed automatically. The default is 3600.
10. In the Pre-Shared Key box, type the shared secret key to be used between the wireless
device and Wireless AP. The shared secret key is used to generate the 256-bit key.
11. In order to proofread your entry before saving the configuration, click Unmask to display
the Pre-Shared Key. To mask the key, click Mask.
12. To save your changes, click Save.
7.8.2 Privacy for a VNS for AAA
For a VNS with authentication by 802.1x (AAA), there are four Privacy options:
Static keys (WEP)

Table of Contents

Related product manuals