hwc_reports.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
239
Working with reports and displays
Viewing reports
11.2 Viewing reports
The following reports are available in the HiPath Wireless Controller, Access Points and
Convergence Software system:
● Forwarding Table (routes defined in the HiPath Wireless Controller Routing Protocols
screen)
● OSPF Neighbor (if OSPF is enabled in the Routing Protocols screen)
● OSPF Linkstate (if OSPF is enabled in the Routing Protocols screen)
● AP Inventory (a consolidated summary of Wireless AP setup)
To view reports:
1. From the main menu, click Reports & Displays. The HiPath Reports & Displays screen
appears.
2. In the Reports list, click the report you want to view:
● Forwarding Table
● OSPF Neighbor
● OSPF Linkstate
● AP Inventory
An example of a Forwarding Table report is shown below:
>
The AP Inventory report appears in a new browser window. All other reports appear
in the current browser window.
To Next Page
Loading...
