Configuring the HiPath Wireless Controller
A31003-W1040-U101-1-7619, July 2006 DRAFT
52 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_startup.fm
Performing the first-time setup of the HiPath Wireless Controller
To connect the HiPath Wireless Controller to your enterprise network:
1. Disconnect your computer from the HiPath Wireless Controller management port.
2. Connect the HiPath Wireless Controller management port to the enterprise Ethernet LAN.
The HiPath Wireless Controller resets automatically.
3. Log on to the HiPath Wireless Assistant. The system is visible to the enterprise network.
4.2.3 Applying the product license key
To ensure all available system functionality is enabled, your product license key must be
applied.
To apply the product license key:
1. From the main menu, click Wireless Controller Configuration. The HiPath Wireless
Controller Configuration screen appears.
2. In the left pane, click Software Maintenance.
3. Click the HWC Product Keys tab.
To Next Page
Loading...
