Virtual Network configuration
A31003-W1040-U101-1-7619, July 2006 DRAFT
168 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsconfiguration.fm
Configuring privacy for a VNS
5. From the WEP Key Length drop-down list, select the WEP encryption key length:
● 40-bit
● 104-bit
● 128-bit
6. Select one of the following input methods:
● Input Hex – If you select Input Hex, type the WEP key input in the WEP Key box. The
key is generated automatically, based on the input.
● Input String – If you select Input String, type the secret WEP key string used for
encrypting and decrypting in the WEP Key String box. The WEP Key box is
automatically filled by the corresponding Hex code.
7. To save your changes, click Save.
To Next Page
Loading...
