Virtual Network configuration
A31003-W1040-U101-1-7619, July 2006 DRAFT
186 HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsconfiguration.fm
Bridging traffic locally
To bridge traffic locally:
1. From the main menu, click Virtual Network Configuration. The Virtual Network
Configuration screen appears.
2. In the left pane Virtual Networks list, click the VNS that you want to define topology
parameters for.
3. Click the Topology tab.
4. In the VNS Mode drop-down list, click Bridge Traffic Locally at AP to enable branch office
mode.
5. To define the VLAN Setting, select one of the following:
● Tagged
● Untagged
If you select Tagged, type the VLAN ID in the VLAN ID box. The default value is 1.
To Next Page
Loading...
