hwc_ongoing.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
247
Performing system maintenance
Performing system maintenance tasks
To change the log levels:
1. From the main menu, click Wireless Controller Configuration. The Wireless Controller
Configuration screen appears.
2. In the System Log Level area, from the Wireless Controller Log Level drop-down list,
select the least severe log level for the Controller that you want to receive: Information,
Minor, Major, Critical. For example, if you select Minor, you receive all Minor, Major and
Critical messages. If you select Major you receive all Major and Critical messages. The
default is Information.
3. Click Apply.
4. From the Wireless AP Log Level drop-down list, select the least severe log level for the
AP that you want to receive: Information, Minor, Major, Critical. The default is Critical.
5. Click Apply.
To Next Page
Loading...
